Konfigurasi Routing RIP di Packet Tracer

Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname R1
R1(config)#interface fastEthernet 0/0
R1(config-if)#ip address 10.10.10.2 255.255.255.252
R1(config-if)#no shutdown
R1(config-if)#exit
R1(config-if)#
R1(config)#interface fastEthernet 1/0
R1(config-if)#ip address 192.168.10.1 255.255.255.0
R1(config-if)#no shutdown R1(config-if)#exit

Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname R2
R2(config)#interface fastEthernet 0/0
R2(config-if)#ip address 10.10.10.1 255.255.255.252
R2(config-if)#no shutdown
R2(config-if)#exit
R2(config-if)#
R2(config)#interface fastEthernet 1/0
R2(config-if)#ip address 10.10.20.1 255.255.255.252
R2(config-if)#no shutdown

Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname R3
R3(config)#interface fastEthernet 0/0
R3(config-if)#ip address 10.10.20.2 255.255.255.252
R3(config-if)#no shutdown
R3(config-if)#exit
R3(config-if)#
R3(config)#interface fastEthernet 1/0
R3(config-if)#ip address 192.168.20.1 255.255.255.0
R3(config-if)#no shutdown
R3(config-if)#exit

R1(config)#router rip
R1(config-router)#version 2
R1(config-router)#net 10.10.10.0
R1(config-router)#net 192.168.10.0
R1(config-router)#exit
R1(config)#exit

%SYS-5-CONFIG_I: Configured from console by console
R1#copy run startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
R1#

R2(config)#router rip
R2(config-router)#version 2
R2(config-router)#net 10.10.10.0
R2(config-router)#net 10.10.20.0
R2(config-router)#exit
R2(config)#exit

%SYS-5-CONFIG_I: Configured from console by console
R2#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
R2#

R3(config)#router rip
R3(config-router)#version 2
R3(config-router)#net 10.10.20.0
R3(config-router)#net 192.168.20.0
R3(config-router)#exit
R3(config)#exit

%SYS-5-CONFIG_I: Configured from console by console
R3#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
R3#